Larke's Roofs, East Anglia roofing experts
North Norfolk District Council · NR12

Bacton flat roof installation and repair

With Bacton Gas Terminal contractors on the doorstep, Bacton gives us a mix of domestic and light commercial roofs. Our flat roofing & epdm covers both ends of Bacton, a single dwelling or a full unit, and the quote sets out the specification whichever it is. We know the streets around Bacton Gas Terminal well, and Bacton Wood is a useful marker when we arrange access.

County
Norfolk
Postcode
NR12
Access
B1159 coast road
From North Walsham
~6 miles
finished ePDM flat roof with new edge trims on a seafront bungalow in Bacton (NR12) off the B1159 coast road, flat roofing & epdm by Larke's Roofs

What Bacton roofs typically need

Coastal bungalows, chalets and terminal-area premises.

  • Properties around Bacton Gas Terminal

    The buildings closest to Bacton Gas Terminal take the brunt of the weather from that side, and they are the ones we are asked to look at most often here. The same applies along the approach to Bacton Wood.

  • Access near the priory ruins at Broomholm

    Scaffold, unloading and parking around the priory ruins at Broomholm are agreed before the van arrives, so nothing on your side of the road is blocked longer than it needs to be.

  • Split and blistered felt

    Old bitumen felt on Bacton extensions splits at the movement joints and blisters where trapped moisture expands, and overlaying it rarely cures either fault.

  • Driven rain at abutments

    Rain arriving horizontally at Bacton finds gaps that rain falling straight down never would. On seafront bungalows in Bacton it is chimneys, dormer cheeks and side abutments we check first.

close-up view of roofer tracing a leak after storm damage on a seafront bungalow in Bacton (NR12) off the B1159 coast road, flat roofing & epdm by Larke's Roofs

The work, step by step

EPDM rubber, GRP fibreglass and felt flat roofs for extensions, garages, dormers and outbuildings, with proper falls, trims and outlets.

  • EPDM rubber roofs
  • GRP fibreglass roofs
  • Torch-on felt systems
  • Extensions, garages and dormers
Full flat roofing & epdm details

From first call to finished roof

  1. Deck inspection

    We lift a section to see the deck; nothing is laid over boards that are soft or damp.

  2. Falls and detailing set out

    Firrings, outlet positions and upstand heights are agreed before the membrane arrives.

  3. Membrane installation

    EPDM, GRP or felt installed with trims and upstands dressed properly at every edge.

  4. Water test and handover

    Outlets checked under flow, edges walked, and the finished roof handed over with the system details.

How we work, and what we don't claim

  • Detailing shown before install

    Upstands, trims and outlet positions agreed with you before anything is bonded down.

  • Domestic and commercial

    From a single slipped tile in Bacton to Bacton Gas Terminal contractors, quoted on the same basis.

  • Fully insured

    Insurance is carried for the work we take on around Bacton, and cover can be confirmed before anyone goes up.

Want a Bacton quote you can actually compare?

Our Bacton quotes list materials, membrane, fixings and detailing, so other Norfolk prices can be judged against them properly.

Serving Bacton and nearby areas

Nearby villages and towns

Bacton sits about 6 miles from North Walsham, so Mundesley, Happisburgh and North Walsham are all on the same run for us. Flat Roofing & EPDM enquiries here are handled the same way. In Bacton that includes commercial premises around Bacton Gas Terminal contractors.

Frequently working in and around Bacton Gas Terminal contractors, holiday parks.

Bacton roofing questions

Do you insulate at the same time?
We can build a warm deck with insulation above the structure, which usually makes sense if the roof is coming off anyway and the room below is cold or prone to condensation.
How long should a new flat roof last?
A well-installed EPDM or GRP roof on a sound, correctly falling deck should give decades of service. What kills flat roofs early is ponding water, poor upstands and being laid over a wet deck, all avoidable.
Why does water sit on our flat roof after rain?
Insufficient fall, a sagging deck or a blocked outlet. On Bacton extensions it's usually falls that were never set properly. We reset falls with firrings rather than lay new membrane over the same puddle.
Does the coastal weather at Bacton change what you'd specify?
Yes. On the coast at Bacton we lean towards stainless or non-ferrous fixings, dry-fix ridge and verge systems and heavier flashing details, because salt and wind shorten the life of standard mortar-bedded work.
Where do you park the van and set up scaffold in Bacton?
That gets agreed with you before anyone sets off for Bacton. Around the priory ruins at Broomholm the approaches can be tight, so unloading and scaffold positions are planned before the work starts rather than sorted out on the morning.

Book a free inspection

Flat roofs fail at the edges and under standing water. Get the falls, upstands and outlets right on your Bacton extension and the membrane choice becomes the easy part. We are out past the priory ruins at Broomholm regularly, so fitting in a look at your roof rarely takes long.

Want a Bacton quote you can actually compare?

Our Bacton quotes list materials, membrane, fixings and detailing, so other Norfolk prices can be judged against them properly.

Serving Bacton and nearby areas