Larke's Roofs — East Anglia roofing experts
Peterborough City Council · PE1

EPDM and fibreglass flat roofs in Peterborough

We are based at Costessey near Norwich and reach Peterborough via the A1(M), about 20 miles from Huntingdon. That matters for flat roofing & epdm: it decides how quickly we can inspect, how we get materials on site, and how we sequence work on city terraces and township estates.

County
Cambridgeshire
Postcode
PE1, PE2, PE3
Access
A1(M)
From Huntingdon
~20 miles
site photograph of commercial roof works on a unit at Fengate industrial area, Peterborough off the A1(M) — flat roofing & epdm by Larke's Roofs
work in progress: re-tiled pitched roof on a city terrace in Peterborough (PE1) off the A1(M) — flat roofing & epdm by Larke's Roofs

How we approach flat roofing & epdm here

EPDM rubber, GRP fibreglass and felt flat roofs for extensions, garages, dormers and outbuildings, with proper falls, trims and outlets.

  • EPDM rubber roofs
  • GRP fibreglass roofs
  • Torch-on felt systems
  • Extensions, garages and dormers
Full flat roofing & epdm details

What happens after you call

  1. Deck inspection

    We lift a section to see the deck; nothing is laid over boards that are soft or damp.

  2. Falls and detailing set out

    Firrings, outlet positions and upstand heights are agreed before the membrane arrives.

  3. Membrane installation

    EPDM, GRP or felt installed with trims and upstands dressed properly at every edge.

  4. Water test and handover

    Outlets checked under flow, edges walked, and the finished roof handed over with the system details.

Our Cambridgeshire service radius

Working out from Peterborough we regularly cover Ramsey, Huntingdon, March and St Ives — a practical radius rather than a marketing map. Flat Roofing & EPDM enquiries here are handled the same way. Work here falls under Peterborough City Council and the PE1 postcode area.

Frequently working in and around Fengate industrial area, Orton Southgate, Lynch Wood offices.

Covering Peterborough and Huntingdon

About 20 miles apart — both are normal working areas for us. Free inspection either way.

Serving Peterborough and nearby areas

Specification options

Torch-on felt systems
Multi-layer bitumen for larger or awkward flats where a robust, easily repairable finish is the practical choice.
Falls and firrings
Firring pieces set the fall so water leaves the roof rather than sitting on it.
EPDM rubber membrane
One-piece rubber for extensions, dormers and garages — no field seams, and it copes well with movement.
Warm-deck insulation build-ups
Insulation above the deck keeps the structure warm and reduces condensation risk compared with old cold-deck details.

Flat Roofing & EPDM FAQs

Can you overlay the existing felt?
Only if the deck below is dry and sound, and we'll lift a section to check. Overlaying a soft deck buys a year or two and costs the whole job again.
How long should a new flat roof last?
A well-installed EPDM or GRP roof on a sound, correctly falling deck should give decades of service. What kills flat roofs early is ponding water, poor upstands and being laid over a wet deck — all avoidable.
Do you insulate at the same time?
We can build a warm deck with insulation above the structure, which usually makes sense if the roof is coming off anyway and the room below is cold or prone to condensation.
EPDM, fibreglass or felt — which should we choose?
It depends on the deck, the traffic it takes and the budget. EPDM suits most extensions and garages, GRP suits balconies and anything walked on, and felt still makes sense on larger or awkward outbuildings. We'll set out the options at inspection.
Do we need permission from Peterborough City Council?
Most like-for-like roof work doesn't need consent, but listed buildings and conservation areas can. If your property looks like it falls into that, we'll say so at inspection so it's dealt with before work starts.

Why customers in Peterborough call us

  • Domestic and commercial

    From a single slipped tile to Fengate industrial area, quoted on the same basis.

  • System-appropriate guarantees

    Flat roof systems carry manufacturer material guarantees; we tell you which applies rather than implying a blanket one.

  • Detailing shown before install

    Upstands, trims and outlet positions agreed with you before anything is bonded down.

Getting a quote

We will lift a section of the existing roof before pricing. Laying new EPDM or fibreglass over a wet deck is the cheap answer that costs twice. Neighbours in Ramsey and Huntingdon get the same service, and the written quote is yours to keep and compare.

Covering Peterborough and Huntingdon

About 20 miles apart — both are normal working areas for us. Free inspection either way.

Serving Peterborough and nearby areas